09-Jun-2021, 05:19 PM
Hi guys,
Finally I've got my Moblite7.
And I am frustrated... I am having major short range issue. It is like 20-25 metres outdoor.
First of all, I have spent about 2 days, trying to bind TX with RX. And all in vain.
I downgraded TX software to 1.1.3 with no success.
I have read all the internet, which told me that I have to get the latest SW for TX, download the latest BetaFlight nightly build, and install latest development build of BF. And then bind in frsky_x_v2 RX mode. And it all settled. But the range is very low. VTX is set to 25 mW. Picture is good. But I have messages "RX critical", "Telemetry lost" all the way and whoop failsaves.
Does anyone have any idea, what to do?
There are some messages on the web addressing the same problem. But I have found no solution.
I can see two options, there are only few people affected and there is no solution. Or the solution is very simple...
And flying time is great. Something between 10 - 12 minutes!
Moblite7 is Crazybee4FR
Taranis X9 Lite is 2.3.12
TX is ISRM 1.1.0/2.1.6 FCC
Finally I've got my Moblite7.
And I am frustrated... I am having major short range issue. It is like 20-25 metres outdoor.
First of all, I have spent about 2 days, trying to bind TX with RX. And all in vain.
I downgraded TX software to 1.1.3 with no success.
I have read all the internet, which told me that I have to get the latest SW for TX, download the latest BetaFlight nightly build, and install latest development build of BF. And then bind in frsky_x_v2 RX mode. And it all settled. But the range is very low. VTX is set to 25 mW. Picture is good. But I have messages "RX critical", "Telemetry lost" all the way and whoop failsaves.
Does anyone have any idea, what to do?
There are some messages on the web addressing the same problem. But I have found no solution.
I can see two options, there are only few people affected and there is no solution. Or the solution is very simple...
And flying time is great. Something between 10 - 12 minutes!
Moblite7 is Crazybee4FR
Taranis X9 Lite is 2.3.12
TX is ISRM 1.1.0/2.1.6 FCC
Code:
#
# diff all
# version
# Betaflight / STM32F411 (S411) 4.3.0 Jun 7 2021 / 22:27:42 (c84170fac) MSP API: 1.44
# config: manufacturer_id: HAMO, board_name: CRAZYBEEF4FR, version: 56f796fb, date: 2019-10-26T09:47:21Z
# start the command batch
batch start
# reset configuration to default settings
defaults nosave
board_name CRAZYBEEF4FR
manufacturer_id HAMO
mcu_id 0029001d3037510637313839
signature
# feature
feature -RX_PARALLEL_PWM
# serial
serial 1 2048 115200 57600 0 115200
# map
map TAER1234
# aux
aux 0 0 0 1450 2100 0 0
aux 1 1 1 900 1300 0 0
aux 2 2 1 1300 1700 0 0
aux 3 27 3 1300 2100 0 0
aux 4 35 2 1300 2100 0 0
aux 5 47 1 1700 2100 0 0
# vtxtable
vtxtable bands 6
vtxtable channels 8
vtxtable band 1 BOSCAM_A A FACTORY 5865 5845 5825 5805 5785 5765 5745 5725
vtxtable band 2 BOSCAM_B B FACTORY 5733 5752 5771 5790 5809 5828 5847 5866
vtxtable band 3 BOSCAM_E E FACTORY 5705 5685 5665 0 5885 5905 0 0
vtxtable band 4 FATSHARK F FACTORY 5740 5760 5780 5800 5820 5840 5860 5880
vtxtable band 5 RACEBAND R FACTORY 5658 5695 5732 5769 5806 5843 5880 5917
vtxtable band 6 IMD6 I CUSTOM 5732 5765 5828 5840 5866 5740 0 0
vtxtable powerlevels 3
vtxtable powervalues 0 1 2
vtxtable powerlabels 25 100 200
# master
set acc_calibration = 34,-159,-5,1
set rx_spi_protocol = FRSKY_X_V2
set motor_output_reordering = 3,2,1,0,4,5,6,7
set align_board_yaw = 180
set bat_capacity = 650
set yaw_motors_reversed = ON
set simplified_gyro_filter = ON
set osd_cap_alarm = 650
set osd_vbat_pos = 2370
set osd_rssi_pos = 2105
set osd_throttle_pos = 2168
set osd_vtx_channel_pos = 2451
set osd_ah_pos = 2159
set osd_mah_drawn_pos = 2402
set osd_warnings_pos = 14666
set osd_disarmed_pos = 2411
set osd_nvario_pos = 301
set vtx_band = 3
set vtx_channel = 1
set vtx_power = 1
set vtx_low_power_disarm = UNTIL_FIRST_ARM
set vtx_freq = 5705
set frsky_spi_tx_id = 78,3,14
set frsky_spi_offset = -22
set frsky_spi_bind_hop_data = 1,96,191,51,146,6,101,196,56,151,11,106,201,61,156,16,111,206,66,161,21,116,211,71,166,26,121,216,76,171,31,126,223,81,178,36,131,226,86,181,41,136,231,93,186,48,141,0,0,0
set frsky_x_rx_num = 1
set gyro_1_align_yaw = 900
profile 0
# profile 0
set vbat_sag_compensation = 100
set iterm_relax_type = GYRO
set simplified_dterm_filter = ON
profile 1
profile 2
# restore original profile selection
profile 0
rateprofile 0
rateprofile 1
rateprofile 2
rateprofile 3
rateprofile 4
rateprofile 5
# restore original rateprofile selection
rateprofile 0
# save configuration
save
#