Hi All,
Hope someone can help me with this....: I have a question about the current ("curr") telemetry sent from the Kiss FC to my Taranis. At 50% throttle I am seeing current values ("curr") of approx. 10 Amps on my radio. From the thrust tests of the motor/prop setup that I have I expected to pull 10 Amps from each motor. Wouldn't that mean the "curr" value sent by the Kiss FC should be more closed to 40 Amps? Would this mean that the FC Telemetry is shown current per motor and not current total? Thanks!
I am using the below:
Kiss FC 32bit V1.03
Kiss 24A ESC's
X4R-SB
RS2205 2300 KV
DAL 5045 BN Props
Tattu 1300 70C 3S
GoPro Hero3
QAV210
All in weight: approx. 550 Gr.
Hope someone can help me with this....: I have a question about the current ("curr") telemetry sent from the Kiss FC to my Taranis. At 50% throttle I am seeing current values ("curr") of approx. 10 Amps on my radio. From the thrust tests of the motor/prop setup that I have I expected to pull 10 Amps from each motor. Wouldn't that mean the "curr" value sent by the Kiss FC should be more closed to 40 Amps? Would this mean that the FC Telemetry is shown current per motor and not current total? Thanks!
I am using the below:
Kiss FC 32bit V1.03
Kiss 24A ESC's
X4R-SB
RS2205 2300 KV
DAL 5045 BN Props
Tattu 1300 70C 3S
GoPro Hero3
QAV210
All in weight: approx. 550 Gr.