Hi Guys,
I've had the gep rocket lite with R-XSR for about 3 weeks now, some effort getting it in the sky but it was working, however had about 4 or 5 times it fell out of the sky, guessing failsafes.
Geprc has been really no with this issue help other than providing a new pid dump which finally got me flying.

In an effort to try a fix I flashed the QX7 radio in Opentx to 2.3.9 , not the RX because I also fly Tinyhawks with that radio and was informed FRSKY ACCST D16 doesnt like 3rd party hardware anymore, and didn't it was necessary because was working before.

So looks like I jumped into a new problem, it won't bind anymore. I get a solid green and red while binding and no green with blinking red after reconnecting the battery, that means firm incompatibilty I think? I do have the blue lite for SBUS, radio mode is XJT D16 (same as before). Went back to original version and still couldn't bind.

Any suggestions to try would be very welcome, Alan

btw, when it wasn't falling from the sky it was really fun to fly and dji goggle / caddx picture was fantasic

I would try to reflash the R-XSR with the last pre-2.x.x firmware. And try to bind again. Remember not to have the receiver and radio too close when you bind.

(01-Aug-2020, 09:48 PM)voodoo614 Wrote: I would try to reflash the R-XSR with the last pre-2.x.x firmware. And try to bind again.  Remember not to have the receiver and radio too close when you bind.

Do you know if fport_fcc_accst_191128.frk is correct or ACCESS ???  ?

Thanks, Alan

The first one you listed. You might have to rewire if you don't have it wired for FPORT currently.