16-Nov-2017, 10:26 PM
Hi,
trying to get an FlySky PPM receiver to talk to the Wasp's FC. The original receiver was a DSMX receiver, but I don't have a compatible transmitter.
Connecting the wires on the same pins did not work, probably because the DSXM was powered by 3.3V, and the FlySky eats 5V.
The picture shows the FlySky receiver laying on top of the original DSMX one, with the DSMX one still wired to the FC. I found that the pin in between the black and the white wire is a regulated 5V pin, so I connected the red wire of the FlySky receiver there.
But alas, no luck. No receiver signal in Betaflight, also not with the IBUS protocol selected, but that was to be expected with a PPM receiver . And yes, I have PPM set to ON on my transmitter, and the binding process appears to have worked.
Should I perhaps wire the white wire to the pin next to the battery input wires? I do not measure anything on that pin, so that could be an input pin, right? Maybe for PPM?
Does anybody know the pinout for this particular board? It apperars to be brand-specific.
trying to get an FlySky PPM receiver to talk to the Wasp's FC. The original receiver was a DSMX receiver, but I don't have a compatible transmitter.
Connecting the wires on the same pins did not work, probably because the DSXM was powered by 3.3V, and the FlySky eats 5V.
The picture shows the FlySky receiver laying on top of the original DSMX one, with the DSMX one still wired to the FC. I found that the pin in between the black and the white wire is a regulated 5V pin, so I connected the red wire of the FlySky receiver there.
But alas, no luck. No receiver signal in Betaflight, also not with the IBUS protocol selected, but that was to be expected with a PPM receiver . And yes, I have PPM set to ON on my transmitter, and the binding process appears to have worked.
Should I perhaps wire the white wire to the pin next to the battery input wires? I do not measure anything on that pin, so that could be an input pin, right? Maybe for PPM?
Does anybody know the pinout for this particular board? It apperars to be brand-specific.