08-Jan-2017, 06:29 PM
I am trying to setup a 3 position switch on my Turnigy 9x (er9x) for the different flight modes in Betaflight. Is it setup similar to a 3 position flap ie... ID0 for angle, ID1 for horizon, and ID2 for acro, right?
Flight modes on Turnigy 9x(er9x) |
08-Jan-2017, 06:29 PM I am trying to setup a 3 position switch on my Turnigy 9x (er9x) for the different flight modes in Betaflight. Is it setup similar to a 3 position flap ie... ID0 for angle, ID1 for horizon, and ID2 for acro, right? 08-Jan-2017, 07:50 PM You can set it any way you want in the Modes tab of BetaFlight. I don't think there is a "standard". (I use one of my two-position switches, and only use Horizon and Airmode.) 09-Jan-2017, 04:56 AM Yea just use one of the self-level mode and acro When having Horizon and Angle mode the same time I get confused very easily... I personally just use horizon mode over angle mode since they are very similar, except horizon mode allow you to do flips 09-Jan-2017, 06:49 AM Does horizon mode give you the ability to dive trees or is that acro only? |
« Next Oldest | Next Newest » |
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
low flight times on 3.5 cinewoop | technoflyer97 | 2 | 129 | 03-May-2024, 09:16 AM Last Post: technoflyer97 | |
Flight time decreased | Billybobthe3 | 8 | 224 | 01-May-2024, 10:57 PM Last Post: hugnosed_bat | |
problems connecting and writing code for the remote (esp32) and the flight controller | YarikVor | 2 | 146 | 23-Apr-2024, 03:58 PM Last Post: YarikVor | |
After 1-2 minutues of flight, drone flips over in air | doublebubble | 22 | 840 | 16-Feb-2024, 11:32 PM Last Post: mstc | |
Basic Autonomous flight | T_Jennings | 2 | 189 | 04-Feb-2024, 10:26 PM Last Post: mstc |