02-Nov-2023, 10:46 PM
Hi
I just finished a new build, the fc is a Speedybee F405 V4.
I'm in DShot300 and the cpu charge is around 45%. I read that It should be more like 20%.
If i set in DShot600 it back down to 300 after reboot. The gyro is at 8.0khz and the pid loop at 4.00khz.
I'm pretty newb for the BF tuning and I'm not sur to use the right setup.
Thank for few tips.
I just finished a new build, the fc is a Speedybee F405 V4.
I'm in DShot300 and the cpu charge is around 45%. I read that It should be more like 20%.
If i set in DShot600 it back down to 300 after reboot. The gyro is at 8.0khz and the pid loop at 4.00khz.
I'm pretty newb for the BF tuning and I'm not sur to use the right setup.
Thank for few tips.