24-Jun-2024, 08:50 AM (This post was last modified: 25-Jun-2024, 05:18 AM by tranhuuanhtu02.)
Hi all, I currently build free flight drone, and I have some problem.
Im using the speedybee F405 wing flight controller (It sound dumb but I can not find any cheapest FC broad and have plug and play in my country). When I fly test, it does not fly straight up, when i check the rpm of each motor in Mission Planner it show nothing about it, but in the servo output tab, it show a bit of information as picture below. After I searched on google, apparently I did not set up the PWM TYPE. So my question is what is hobbywing 40Av2 skywalker ESC type, and why is it written on the broad is UBEC? how can i change the rpm for the BLDC motor?
this is my set up info:
FC: speedybee f405 wing
ESC:hobbywing esc 40Av2
BLDC: A2212 1000kv
Battery: 3s 2300mAh, 45C
Im using the speedybee F405 wing flight controller (It sound dumb but I can not find any cheapest FC broad and have plug and play in my country). When I fly test, it does not fly straight up, when i check the rpm of each motor in Mission Planner it show nothing about it, but in the servo output tab, it show a bit of information as picture below. After I searched on google, apparently I did not set up the PWM TYPE. So my question is what is hobbywing 40Av2 skywalker ESC type, and why is it written on the broad is UBEC? how can i change the rpm for the BLDC motor?
this is my set up info:
FC: speedybee f405 wing
ESC:hobbywing esc 40Av2
BLDC: A2212 1000kv
Battery: 3s 2300mAh, 45C