Posts: 3
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jan 2017
Reputation:
0 I have an SPRacing F3 EVO board and i want to test the gyro sensors on the bench with just a battery connected. However to enable Blackbox logging CleanFlight/BetaFlight require that the system be "ARMED". Is there a way to fool the system into thinking it is armed just for testing purposes? I hope to compare multiple boards at the same time so want to do it all without having to arm the systems with a radio.
• Posts: 626
Threads: 96
Likes Received: 531 in 218 posts
Likes Given: 188
Joined: May 2016
Reputation:
20 why not do it with the props off?
• Posts: 2,416
Threads: 51
Likes Received: 1,861 in 1,175 posts
Likes Given: 3,315
Joined: Mar 2016
Reputation:
74 Are you trying to do this without using your transmitter? I don't think it will "arm" without a Tx signal (I suspect the motor tab provides the "signal" when connected to betaflight) . Seems like it could work if you arm via switch on the Tx and just leave the throttle alone.
• Posts: 947
Threads: 66
Likes Received: 350 in 248 posts
Likes Given: 164
Joined: Apr 2016
Reputation:
34 Maybe you could set the arming switch as always on in the modes tab? I haven't tested this myself, so I don't know if it will work
• Posts: 1
Threads: 0
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Aug 2021
Reputation:
0 CLI =
set blackbox_mode = ALWAYS
save
•