Posts: 135
Threads: 40
Likes Received: 18 in 16 posts
Likes Given: 1
Joined: Oct 2019
Reputation:
1 I have an EMAX TinyHawk RTF that has a VTX issue. Then I plug in the battery the vtx transmission is fine. When I throttle up to fly the quad the goggles completely snow out and I cant see anything. I shut the quad down and land it as best I can with no video and try to arm again. The goggles are still snowed out until I unplug the battery and then plug it back in. I have been in contact with Emax support and they want me to send it to them for a warranty check. I am ok with that but the stock vtx is not know for being a rock star. I was thinking about forgoing the return and just getting a nano VTC to replace the stock one. I am looking at the HGLRC Nano to use. I can basically buy the HGLRC for the cost of sending the quad back to EMAX.
THOUGHTS?????
• Posts: 5,336
Threads: 675
Likes Received: 3,166 in 1,752 posts
Likes Given: 2,041
Joined: Jan 2016
Reputation:
141 Do you have anything to test the VTX in that quad, just to make sure it's the culprit?
Not sure why they can't just send you a replacement VTX since it's probably the cheapest option for the both of you.
• Posts: 135
Threads: 40
Likes Received: 18 in 16 posts
Likes Given: 1
Joined: Oct 2019
Reputation:
1 I am only assuming it is the VTX. If I turn everything on the goggles work fine until I throttle up. I sent them some pictures of the board and they said it looked fine. I am using the EMAX goggles from the RTF bundle.
• Posts: 5,336
Threads: 675
Likes Received: 3,166 in 1,752 posts
Likes Given: 2,041
Joined: Jan 2016
Reputation:
141 Do you have a different VTX you can swap it out and see if it works?
• Posts: 135
Threads: 40
Likes Received: 18 in 16 posts
Likes Given: 1
Joined: Oct 2019
Reputation:
1 Oscar,
I do not. First quad. I can get the HGLRC for about $17.00.
•