Guten Tag my dear Pilots from overseas,
Since this is my first active thread i`d just take one sentence to indtroduce myself. I was already alot on this forum as guest when I needed answers or just follow discussions- so now i though this is the time to join sicne i didnt find anything like this before^^ Im Basti from Germany who just got into the hobby again. I was now going for the digital system, since the analog video feed is unbearable once you tried the digital one...
Long story short I am using a Geprc MArk 4 HD 5" Frame with my dji air unit, a Mamba F405 stack - everyhting worked fine in the beginning.
After a face to face meeting with a tree my FC MCU chip got shorted and i had to replace the FC. Now when i wanted to try it out my custom osd wasnt showing inside the goggles anymore. I was checking everything i could find (enable custom osd in goggles, right uart RX/TX, enable OSD in betaflight, enable the MSP, etc...)
I thought maybe setting the Air unit and goggles back to factory settings would help, but then i realized, that the USB connection is flicking on and off when i connect it to the PC.
Has anyone ever had something like this before? Does this mean my Airunit is somewhat fried?
Thanks in advance![Smile Smile](https://intofpv.com/images/smilies/smile.png)
-Basti
Since this is my first active thread i`d just take one sentence to indtroduce myself. I was already alot on this forum as guest when I needed answers or just follow discussions- so now i though this is the time to join sicne i didnt find anything like this before^^ Im Basti from Germany who just got into the hobby again. I was now going for the digital system, since the analog video feed is unbearable once you tried the digital one...
Long story short I am using a Geprc MArk 4 HD 5" Frame with my dji air unit, a Mamba F405 stack - everyhting worked fine in the beginning.
After a face to face meeting with a tree my FC MCU chip got shorted and i had to replace the FC. Now when i wanted to try it out my custom osd wasnt showing inside the goggles anymore. I was checking everything i could find (enable custom osd in goggles, right uart RX/TX, enable OSD in betaflight, enable the MSP, etc...)
I thought maybe setting the Air unit and goggles back to factory settings would help, but then i realized, that the USB connection is flicking on and off when i connect it to the PC.
Has anyone ever had something like this before? Does this mean my Airunit is somewhat fried?
Thanks in advance
![Smile Smile](https://intofpv.com/images/smilies/smile.png)
-Basti