Posts: 193
Threads: 31
Likes Received: 3 in 3 posts
Likes Given: 2
Joined: Sep 2023
Reputation:
0 Hi
I have a new betafpv micro elrs rx which has servo connections for a fixed wing. it is supposed to work in pwm. After binding successfully to my zorro elrs tx i get telemetry but no servo control on any channel. This seems to be not in pwm mode. Youtube setup tips seem to show settings via wifi but when i go into its wifi setup it looks diiferent and no mention of pwm channels. the software on both the rx and tx is elrs 3.3.0.
Any ideas please?
• Posts: 950
Threads: 71
Likes Received: 339 in 253 posts
Likes Given: 156
Joined: Dec 2021
Reputation:
19 Sounds like its possibly got the Crossfire firmware option loaded?
Get the correct firmware from BetaFPV direct and flash that?
• Posts: 4
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Dec 2023
Reputation:
0 Try checking your channels/Mixes
• Posts: 1,506
Threads: 49
Likes Received: 714 in 525 posts
Likes Given: 478
Joined: Oct 2020
Reputation:
93 Do you have the correct firmware flashed? It should be "BetaFPV 2.4GHZ PWM RX". Show a screenshot of the receiver's webui.
• Posts: 173
Threads: 15
Likes Received: 77 in 49 posts
Likes Given: 161
Joined: Jan 2022
Reputation:
4 There's a "Servos" option in the "Other Options" pull-down of the Betaflight Configurator's Update Firmware page. I suspect you need to rebuild Betaflight with this option selected.
• Posts: 193
Threads: 31
Likes Received: 3 in 3 posts
Likes Given: 2
Joined: Sep 2023
Reputation:
0 Thanks. How does elrs configurator on the pc connect to a receiver?
• Posts: 1,786
Threads: 61
Likes Received: 1,038 in 750 posts
Likes Given: 98
Joined: Jan 2023
Reputation:
53 There are several ways (Betaflight pass through or via UART, you can refer to expresslrs website) but wifi is probably the easiest in your case. You were already on the firmware update page as shown in your screenshot. Just first compile the firmware in configurator for the correct target which will create the bin file. Then connect to the RX via wifi and use the same webpage to load the compiled file.
• Posts: 193
Threads: 31
Likes Received: 3 in 3 posts
Likes Given: 2
Joined: Sep 2023
Reputation:
0 Many thanks all it's now sorted. For some reason it was supplied with the wrong firmware.
•