Beecore F3 EVO Brushed ACRO Flight Control Board DSM2 For Inductrix Tiny Whoop Eachine E010
So we finally have an affordable Cleanflight/Betaflight FC that is designed to fit the Tiny whoop / Eachine e010 micro quad. Not more messing around or DIY'ing.
Only thing that is putting me off is the DSM2 RX, and no Frsky support!
Price $29
http://www.banggood.com/Beecore-F3_EVO_B...89021.html
Spec
weight: 3g
STM32 F303 processor
Six-Axis: MPU6500
Size: 2mm x 26mm
Firmware Target: Betaflight/Cleanflight EVO F3
Features
1.The world's first F3_EVO controller compatible for DSM2.
2.Cleanflight ready, born for acro flight controller for the BeeDuctrix / Tiny Whoop / Inductrix quad!
3.Full Cleanflight/Betaflight compatibility on a STM32 F303 F3_EVO 3x1 style processor.
4.Fully programmable through Cleanflight / Betalfight using the onboard USB port! Tune all the parameters, PID's, and rates to your perfect settings!
5.High discharge battery connector wire for more power and performance.
6.Compatible Spectrum/JR(DSM2 protocol) DEVO10/DEVO 7E(with deviation firmware).
7.Can fly your Inductrix style quad in full rate mode (or even air mode!), fully execute flips/ rolls, and shoot the smallest of gaps with precision! Tuned to give you that locked in feeling you get with standard race quads.
Funniest thing...
... is that they stole FuriousFPV‘s claim for the "the world's first F3 FC for the thiny whoop" haha (Furious is also developing a Inductrix BF FC, but it's far from release)
So we finally have an affordable Cleanflight/Betaflight FC that is designed to fit the Tiny whoop / Eachine e010 micro quad. Not more messing around or DIY'ing.
Only thing that is putting me off is the DSM2 RX, and no Frsky support!
Price $29
http://www.banggood.com/Beecore-F3_EVO_B...89021.html
Spec
weight: 3g
STM32 F303 processor
Six-Axis: MPU6500
Size: 2mm x 26mm
Firmware Target: Betaflight/Cleanflight EVO F3
Features
1.The world's first F3_EVO controller compatible for DSM2.
2.Cleanflight ready, born for acro flight controller for the BeeDuctrix / Tiny Whoop / Inductrix quad!
3.Full Cleanflight/Betaflight compatibility on a STM32 F303 F3_EVO 3x1 style processor.
4.Fully programmable through Cleanflight / Betalfight using the onboard USB port! Tune all the parameters, PID's, and rates to your perfect settings!
5.High discharge battery connector wire for more power and performance.
6.Compatible Spectrum/JR(DSM2 protocol) DEVO10/DEVO 7E(with deviation firmware).
7.Can fly your Inductrix style quad in full rate mode (or even air mode!), fully execute flips/ rolls, and shoot the smallest of gaps with precision! Tuned to give you that locked in feeling you get with standard race quads.
Funniest thing...
... is that they stole FuriousFPV‘s claim for the "the world's first F3 FC for the thiny whoop" haha (Furious is also developing a Inductrix BF FC, but it's far from release)