(16-Jun-2021, 03:17 AM)iFly4rotors Wrote: Hi Marc,
Do you have any pictures of the build...showing the parts...and showing the progression??
Hi,
Unfortunately no photos during assembly... I've been working on this 3" platform for 2 years, frame design, propeller thrust test, engine test... and no pictures
Test went with great result, I hope to make the DVR video avant la fin de semaine.
Flying time : 32'30" Max distance : 6.05 km Flying distance : 18.7 km
(16-Jun-2021, 06:36 AM)V-22 Wrote: Nice work! Why did you decide to go with a pusher configuration? I assume it would be less efficient, but your result is impressive!
Can you share any of your motor and prop testing data?
Thanks...
About the pusher it's only a test, why not It's my first time in pusher and result are good.
No data for motors and props, it's about feeling, no test bench here.
In theory, the forced air below the props should have less disturbance on a pusher since there are no arms to disrupt the airflow. Whether or not it is considered minimal or not, the air flow coming down onto the arms in a normal configuration does, in fact, disturb the airflow. Now whether or not that translates to anything noticeable is another thing.
I have one pusher. If flies good and I like it, but can't really say if it is more efficient since the frame is on the heavy side and the FC is a 20x20...so...who knows.
I like the lightweight GPS! Do you have any pictures of the construction? Just remove the ceramic antenna and solder on a wire? What length did you use?
I like the lightweight GPS! Do you have any pictures of the construction? Just remove the ceramic antenna and solder on a wire? What length did you use?
Hi
No picture Yes just remove ceramic, wire of 47mm... and it's finish.