Hi everyone

I'm in the process og building my first quad and it is so exciting! However, the more I research the more I'm getting confused about how to wire up the components mentioned in the title.

Do I connect the camera and the Unify Pro directly to each other?

What do I solder to the PDB and where? Do I solder some things directly to the flight controller or do everything go to the PDB?

I hope you can clear up a bit of the confusion for me.
Thanks!

Hi and welcome yo the forum! Not many of us here use a KISS system but we'll definitely be able to help with your basic wiring. Firstly, could you please paste a link to the exact flight controller and pdb you are using. From the quick bit of research I did, it looks like the KISS FC is an AIO and you may not need a pdb

Thank you for your quick reply, RENOV8R!

The flight controller is the Kiss 32bit Flight Controller V2:
https://www.quadcopters.co.uk/kiss-32bit...troller-v2

The PDB is the Wolf Reverb PDB OSD Rev 2:
https://impulserc.com/products/wolf-reverb-pdb-osd-kit

TBS Unify Pro:
https://www.team-blacksheep.com/products/prod:unify_pro

Runcam Swift 2:
https://shop.runcam.com/runcam-swift-2/

I guess what is increasing the confusion is the wiring of OSD and for the LUA script.

I have the ESC's wired to the PDB already.

Thank you for any advice!

Kiss doesn't have built-in OSD. So you will have to buy a separate OSD. The diagram is pretty self explanatory. What issue are you having?

Hi voodoo614

Thanks for your reply. The PDB has the osd capability. I am unsure of the wiring of the mentioned components. I have no diagram of the wiring of those components and as it is my first quad I could use some directions on how the components should be interconnected. Especially FC, PDB, VTX and camera.

Oh, I see.

So you wire the camera signal to video on pdb. Then the VTX signal to video out on pdb. You will power the VTX and camera with appropriate voltage supply.

Okay, thanks! Could you take a look at the wiring diagram I made and confirm if it is correct?
Is it correct that the crossfire receiver needs to be soldered directly to the FC and not to the PDB?

Your diagram looks good.

Fantastic! I'll get right to it, then.

Thank you for your help!