Posts: 31
Threads: 7
Likes Received: 2 in 1 posts
Likes Given: 0
Joined: Nov 2016
Reputation:
0 Hey dudes. You guys have been great. Figured out a lot through reading the site and you tube. But another newbie question. My spectrum radio is bound to the serial telemetry receiver all motors running the correct way(awesome tutorial by the way) but in clean flight the radio is not working. Nor out of clean flight. I know it it is something small. Plz help. So close. This would be a great Xmas present! Lol
• Posts: 307
Threads: 18
Likes Received: 69 in 48 posts
Likes Given: 33
Joined: Sep 2016
Reputation:
9 How do you want to connect it, pwm, ppm or serial. Witch RX and FC are you using?
• Posts: 2,416
Threads: 51
Likes Received: 1,861 in 1,175 posts
Likes Given: 3,315
Joined: Mar 2016
Reputation:
74 To see the movement in the Receiver tab in Cleanflight, turn on the transmitter first, then plug in the USB cable and connect to Cleanflight.
(The other issue is probably an arming issue.)
• Posts: 31
Threads: 7
Likes Received: 2 in 1 posts
Likes Given: 0
Joined: Nov 2016
Reputation:
0 when in clean flight. in the reciever tab. i click on serial rx. i save it. but when you check what you have done in receiver the serial tab is empty again. I can't get it to stay highlighted
• Posts: 307
Threads: 18
Likes Received: 69 in 48 posts
Likes Given: 33
Joined: Sep 2016
Reputation:
9 And after that you go to the “Configuration” tab and scroll part of the way down. In “Receiver Mode”, select RX_SERIAL. In “Serial Receiver Provider”, select SPEKTRUM2048.Click “Save and Reboot”.
• Posts: 31
Threads: 7
Likes Received: 2 in 1 posts
Likes Given: 0
Joined: Nov 2016
Reputation:
0 Thanks dude! Even found a YouTube vid. I'm almost there
• Posts: 307
Threads: 18
Likes Received: 69 in 48 posts
Likes Given: 33
Joined: Sep 2016
Reputation:
9 Good to here that it's almost working, what did you changed?
•