Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tiny Whoover!
#16
Just put 8520 brushed motors on the back, the eachine 66mm props do give noticeably more speed than the ladybirds. Replaced the front props with 3 bladed ones from the cheerson CX95s, and added a couple of loops of cotton to make them stay on the 0615 motors. These small motors don't even get hot with these props designed for 0720's, cool!
Windless fields and smokeless builds
[-] The following 1 user Likes Tom BD Bad's post:
  • Drone0fPrey
Reply
Login to remove this ad | Register Here
#17
I did it!! My brushless prototype is done.
Old EVO f3 brushed FC convert for ESC 4a with racerstars 0703 10000kv motors
It works but brushless motors shack a lot the stuff I used for frame... Will build a good one when I'll have time.


Attached Files Thumbnail(s)
   
[-] The following 3 users Like loulou67's post:
  • jimbo_wa, Tom BD Bad, Carl.Vegas
Reply
#18
wow! sooooo cool... the only bad part... I just moved out of a house that had a ton of floorspace... I think I might still have floorspace in the new house that would be appropriate for this... enough to at least make a single proper course...

I need to get back in the air first before I'll be able to start doing one of these.
carl.vegas
Current Quads: Operational: Diatone GT2 200 In need of repair: Bumble Bee, tehStein,  Slightly modified Vortex 250 
Reply
#19
I am hoping to go to the local RC car track to rip my Whoov around, I have an abscess on my tooth though so not sure if I am going to be up for it... I will be uploading video as soon as I go and do a few laps...
Windless fields and smokeless builds
Reply
#20
Abscess in your tooth. That is not good.
Reply
#21
Not at all, now 'my good side' looks like a fat guy!
Windless fields and smokeless builds
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Mike Rowe flying tiny whoops!? Rob Axel 1 228 08-Mar-2024, 11:48 PM
Last Post: Rob Axel
  Accessory NameLessRC Tiny GPS - 1.6g V-22 28 3,633 26-May-2021, 10:53 PM
Last Post: iFly4rotors
  tiny wing 450mm hugnosed_bat 0 550 18-May-2019, 08:31 AM
Last Post: hugnosed_bat
  Tiny Whip - Turning a Tiny Whoop into RC car Oscar 8 3,709 14-Mar-2018, 01:23 AM
Last Post: Tom BD Bad
  Accessory TINY GATES "ASSEMBLE AND FLY" Pimousse 3 1,890 02-Apr-2017, 03:04 PM
Last Post: Drone0fPrey


Login to remove this ad | Register Here