Posts: 132
Threads: 29
Likes Received: 5 in 5 posts
Likes Given: 94
Joined: Mar 2021
Reputation:
0 I have been flying my Ethix Mambo for over a year now and love being able to fly my digital quads on crossfire with the module and my analog apex’s on tracer. Yesterday while flying the analog quad in a turn it stayed in the turn on its own for a few seconds and wasn’t responding to the sticks. I had to disarm crashing in a tree. I figured it was the wiring or the tracer receiver so I flew another analog quad and in one minute of flying it did it again. It seems to be locked out like it was flying its last command ? I fly in the middle of nowhere so I doubt it’s signal related and from searching the internet this is happening to more Mambo owners. Please use caution because it could cause some major damage or injuries.
• Posts: 6,099
Threads: 172
Likes Received: 2,283 in 1,830 posts
Likes Given: 4,730
Joined: Feb 2019
Reputation:
100 there should come a failsafe, it might be a wrong signal.
i would suggest to check the gimbals calibration and work. calibrate them freshly.
on the tango 2 the only common issue was the sd card and its stored stickcalibration. format the sd card or replace and calibrate freshly did solve the issues back than.
Posts: 54
Threads: 8
Likes Received: 17 in 15 posts
Likes Given: 9
Joined: Jun 2023
Reputation:
1 Yeah, I had the same problem lol. I made a couple of videos on it... it might explain it better than trying to here.
Hope that helps, but likely not an actual hardware issue at all.