Hello. I'm pretty new to all this. The Radiomaster Zorro is my first controller.

I'm slowly wrapping my head around how its setup works. I have the basic controls all working, as well as a switch set to arm/disarm and one of the 3-way switches set to flight mode. I also figured out how to set another toggle to turn on the beeper in my drone.

What I'm trying to do now is set one of the potentiometer dials to control the volume in the Zorro itself. Unfortunately I'm a bit lost here.  I'm guessing I'd do it under the "Special Functions" screen (model setup) since one of the defined functions is simply "volume". But the syntax for the switches on this screen is entirely different than the Mixes and Inputs screen for some reason. So I'm not clear what corresponds with the dials. And this isn't documented in the manual.

Options begin with "SA" (up/down), "SB" (3-way), "SC" (3-way), "SD" (up/down) etc all the way through to "SH". Then we get "tRl" and "tRr", "tEd", "tEu", "tLd" "tLu" "tAl" "tAr". Then
"On" (power on?), "One" (???), "FM0" (???) then it appears to be telemetry stuff, and so on.

Help?

You want ON, then Volume, then one of the pots (I use S2 on my 16S) then click the box far right to make it coloured (live)


PS, the symbol for a pot is a circle of radial dashes

(15-Aug-2023, 05:29 AM)BadRaven Wrote: You want ON, then Volume, then one of the pots (I use S2 on my 16S) then click the box far right to make it coloured (live)


PS, the symbol for a pot is a circle of radial dashes

Thanks! It seems my main confusion was thinking that the first column was selecting the switch/dial, while it was actually the third. Unfotunately the Zorr's display is limited and so you just get cryptic options.

Can you elaborate on what the first column actually means and what some of those other options do?

When all else fails, read the flippin Manual, Eh?

https://edgetx.gitbook.io/edgetx-user-ma...-functions

(15-Aug-2023, 07:43 AM)BadRaven Wrote: When all else fails, read the flippin Manual, Eh?

Heh... well, like I said: I'm new to all this. I was looking in the Zoro manual. It didn't occur to me to dig up a manual for EdgeTX and look there.

Although that page doesn't outline all the options I saw, at least it'll get me a bit closer. Thanks.