07-Dec-2017, 08:02 PM
Needing some help:
R-XSR
Lumineer F4 AIO
I figured out how to flash newest firmware using DFU.
next step i do is setup rx. I connected r-xsr to fc and bat to fc.
Gnd to gnd
Sbus to sbus
5v to 5v
S port to t6
I bound it now problem. I have solod blue light and green so its in sbus. Disconnect power i get telemetry lost. So its bound.
Betaflight settings saved reboot after each setting
Port, soft serial u art 1 which is where the sbus connected.
Uart 3 smart audio
Uart 6 smart port
Rx
Spectrum sbus
Telemetry soft serial on.
All settings stuck and saved.
No input on receiver tab. I have tried changing channel map and all the options. Nothong is working.
R-XSR
Lumineer F4 AIO
I figured out how to flash newest firmware using DFU.
next step i do is setup rx. I connected r-xsr to fc and bat to fc.
Gnd to gnd
Sbus to sbus
5v to 5v
S port to t6
I bound it now problem. I have solod blue light and green so its in sbus. Disconnect power i get telemetry lost. So its bound.
Betaflight settings saved reboot after each setting
Port, soft serial u art 1 which is where the sbus connected.
Uart 3 smart audio
Uart 6 smart port
Rx
Spectrum sbus
Telemetry soft serial on.
All settings stuck and saved.
No input on receiver tab. I have tried changing channel map and all the options. Nothong is working.