@F1nny
"Did the Runcam Mini give you more camera angle? I have a regular runcam swift on and can't get enough angle for how I like it... I think I am about 25 degrees. I already ordered the mini in hopes.... "
I don't have an issue with standard Runcam Swift on my Skitzo 1 build. I'm running at 30deg, but there is enough clearance to go to 45deg and probably more. My Runcam Swift clears top of the stack fine and the only issue would be if I wanted to go far enough where the top of the cam (or the cam connector with wires) would hit middle of the stack (my FC) but by that time I would be way over 45 degrees. I suppose it all depends where your different stack levels are located, I have a nice gap just where the top edge of the camera is. They also make Runcam Swift with the connector at the bottom instead of the top, I used it on my other build where I couldn't get enough clesrance with the connector on the top.
Anyway, here is my Skitzo 1 with the regular Runcam swift :
In fact now that you mentioned it I'm more worried about Runcam Mini, because while this camera is overall smaller, it is actually deeper than regular Runcam (distance between center mounting screw to the rear side of the cam is longer than on regular cam).
I should finish the build tonight, will let you know.