12-Jun-2022, 06:14 PM
I had a good build with the source podracer using the JHEMCU UPDATED GHF411 PRO AIO but every time I landed slightly too hard it would fry the entire board so I went with the HAKRC F722 2-6S AIO instead because it had an mpu 6000 and now it's back to flying away due to oscillations. I have 2 1000uf capacitors soldered directly to the board with 20 gauge wire with less than 3cm of wire on each. I had the same problem with the JHEMCU, but just 1 capacitor was enough to fix it and it flew well until I fried every board I had.