My tinywhoop video feed has turned to be overexposed to the point I can't see anything on when flying against light.

I'm thinking something got damaged after many flights and bumps but wanted to check if there is anything I could try to fix this  (Its a betafpv CO2 camera, so no osd control to check).

Any hope or will I have to get a replacement?

tks

I would carefully check (preferably under magnification) to see if you might have lost an electronic component.

Also check the lens housing for cracks/separation from the board, if light leaks in, it can also wash out the sensor.

Thks for the tips guys. Will pull it apart for a thorough inspection..