For those like me who haven't already jumped ship to EdgeTX, another minor release of OpenTX got released a couple of weeks ago.

Download links are at the bottom of the following web page...

https://www.open-tx.org/2021/07/23/opentx-2.3.14

You will also need the new 2.3v0038 SD Card contents from HERE.

For instructions on how to flash the new version of OpenTX, see Oscar's guide HERE and/or another guide on the same HERE, and to backup your transmitter settings first in case something goes wrong, see a guide on how to do that HERE.

Release Notes for OpenTX 2.3.14 are below.

New since 2.3.13

ALL RADIO

• fix excessive RTC battery drain (Bug affecting all radio model, introduced in 2.3.0, thx MikeB for spotting this)
  

ACCESS RADIO

• fix possible jerky servo movement
  

X9D+ 2019 RADIO

• fix trainer mode change potentially triggering emergency mode
  
• fix trainer jack detection
  

MISCELLANEOUS

• fix AFHSD3 option not available on some radio (x7/x9d+)
  
• fix AFHSD3 broken on colorlcd radio since 2.3.12
  

COMPANION

• fix curve tip window showing blank
  
• fix Companion MacOsx not running on some version of MacOsx
  
• fix negative sign missing for telemetry source formula
  

I am not even sure we will see OpenTX 2.4 anytime soon.

One one OpenTX issue a dev said: “ Currently, my plan is to add this feature to EdgeTX”: https://github.com/opentx/opentx/issues/7251

Same goes with Betaflight 4.3.

Hopefully the devs can put aside their differences and get these releases out the door.

A note on using this with expresslrs.

this opentx release with the newest stable expresslrs 1.0.1 still requires you to update the lua script on the sd card. The one in opentx sd card contents will not work just click the link on the Elrs configurator and replace the script in the tools folder.

I have an issue after updating my X9D+ 2019 SDcard files. I can't enter boothloader settings and the power button starts flashing rapitly after blugging in to the USB. Have you guys seen something like that before?

Youtube video link about that issue

(14-Dec-2022, 05:27 PM)henso Wrote: I have an issue after updating my X9D+ 2019 SDcard files. I can't enter boothloader settings and the power button starts flashing rapitly after blugging in to the USB. Have you guys seen something like that before?

Youtube video link about that issue

  I was having a similar problem but I was going from opentx to edgetx and my radio wouldn’t do anything after flashing the bootloader.
I unplugged my battery and then was able to get into boot loader mode again.
I went back to open tx until I get a touch screen.

Instead of holding down power button while trims are pushed inward for boot loader mode just touch it and release is all that is needed.