Hi guys,
 I'm looking at getting back into FPV. I was wondering If I could have some help. I have these old pair of fat sharks with a funny 6 pin futaba style plug that i believe is used for Power and AV, now I have stupidly lost the cable that plugs into it. If you could help with what sort of cable ill need to purchase that would be great. I have attached some photos.

Cheers Eddie  

That seems to be a head tracker cable for Futaba: https://hobbyking.com/en_us/fat-shark-to...tore=en_us

Do you not had a barrel connector port on the right side to power up the goggles?

There is another port on the bottom right but it has the head phone symbol above it, do you reckon you could power it off that?

No, do not connect voltage into the headphone socket otherwise you will fry something on the control boards.

You need a specific cable for the FatShark BASE SD FPV Goggles (FSV1011) that go into that Futaba style socket.

I found a couple of listings for that cable but all show "out of stock" which probably means forever because I would be really surprised if FatShark still manufacture that bespoke cable for an 8 year old set of discontinued goggles.

I would contact FatShark support and ask if they have one. They may have a few new old stock cables gathering dust in the back of their stock cupboard that they might be prepared to sell.

FatShark Support Contact Page --> https://www.fatshark.com/contact-us

FatShark BASE SD FPV Goggle User Manual --> https://s3.amazonaws.com/helpscout.net/d...l-RevC.pdf

Thanks heaps mate, I managed to find one off Amazon for relatively cheap post to NZ was expensive though! Yikes. Thanks for ya help Eddie