Posts: 2
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2022
Reputation:
0 07-May-2022, 11:46 PM (This post was last modified: 11-May-2022, 09:24 PM by Ryan O..) This is my first time on this forum. I've had an issue with two different NAZE 32 boards (one rev5 and one rev6). When I try to flash the firmware with Cleanflight, Betaflight, or the STM32 cube flasher I get a no COM port detected error. I've made sure my boot pad shorting wire works, and used several data cables and two different pc's to eliminate variables. The computer makes the "device plugged in sound" when I plug the board in. Any help would be much appreciated and if you need more information I'll do my best to provide it. Thanks
-Ryan
• Posts: 4,550
Threads: 38
Likes Received: 1,245 in 1,064 posts
Likes Given: 430
Joined: Aug 2020
Reputation:
118 Try downloading ImpulseRC driver fixer or Zadig to see if it can fix the driver issues on you computer not detecting the COM port.
• Posts: 2
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2022
Reputation:
0 Thank you, my problem’s solved and the quad’s now flying.
• Posts: 4,731
Threads: 392
Likes Received: 3,231 in 1,827 posts
Likes Given: 3,214
Joined: Apr 2019
Reputation:
101 Wow that is seriously old school. Tell me you are using SimonK Afro ESCs!
•