29-Jul-2016, 01:45 PM
Hi guys,
Not sure if anyone has a lot of experience with the KISS FC, it's my first build using one (with KISS ESC's too).
I've not managed to get this thing to fly, it barely flys in level mode and acro just goes nuts. In level mode it slowly pitches forward and any attempts to give input to correct result in violent rocking backwards and forwards. If I connect to the KISS GUI I can see that AngleY is not moving in proportion to my manual pitching of the quad, it just seems to jitter between -20 and +20 degree's. In fact if I roll the quad and watch AngleX incremental correctly, it appears that AngleY is incrementing too, almost like they're bonded.
I've tried contacting the folks at Flyduino but I'm wondering if their on holiday at the moment as its gone a bit quiet.
Any ideas for testing?
Cheers
Sigloss
Not sure if anyone has a lot of experience with the KISS FC, it's my first build using one (with KISS ESC's too).
I've not managed to get this thing to fly, it barely flys in level mode and acro just goes nuts. In level mode it slowly pitches forward and any attempts to give input to correct result in violent rocking backwards and forwards. If I connect to the KISS GUI I can see that AngleY is not moving in proportion to my manual pitching of the quad, it just seems to jitter between -20 and +20 degree's. In fact if I roll the quad and watch AngleX incremental correctly, it appears that AngleY is incrementing too, almost like they're bonded.
I've tried contacting the folks at Flyduino but I'm wondering if their on holiday at the moment as its gone a bit quiet.
Any ideas for testing?
Cheers
Sigloss
QAV210 - LUX FC - LB 20A ESC - Cobra 2205 2300
QAV210 - LUX FC - DYS XS20A ESC - DYS SE2205 2300
Alien 5" - KISS FC - KISS 24A ESC - Lumenier 2206 2350
QAV210 - LUX FC - DYS XS20A ESC - DYS SE2205 2300
Alien 5" - KISS FC - KISS 24A ESC - Lumenier 2206 2350