Hello every ! 

Fisrt of all hope everyone doing good,

So here is my Issue, i'm pretty new to FPV, just built my first quad 4 month ago, and decided to upgrade with a GPS today ! 

but guess what ? betaflight as decided to not recognize my TBS M8-2 GPS, so I searched for some help : 

https://intofpv.com/t-gps-not-found-in-b...ht-no-sats --> I tried everything in this thread. 

But it doesn't work for me, I tried soldering GPS to another UART, and tried different BAUD rate in betaflight.

When I plug the drone via USB or with the LiPo, the GPS "PW" led light in fixed red, and the "PPS" led light in fixed green, and nothing happen then, i waited for 10min or more but no change.

You can find my soldering in the photos, and the CLI DUMP in the pastebin link.

If someone have any fix or see an issue that I missed it would help me.

Sorry btw for the bad English ! I'm from France

FC + ESC Stack : SPEEDYBEE F405 V3 

Pastebin for the dump :
pastebin betaflight dump

Soldering images :
Soldering image
the green is T6 and the blue wire is soldered to R6 (I already tried to reverse them still no gps icon lit in betaflight)