Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Furibee X140 with Dal Cyclone 3056 props and Garila 1507 motors
#1
That's me sitting just next to the shade of the tree, center frame of the thumbnail.


This time in 1080p resolution -



And the crash that ended the day!

Windless fields and smokeless builds
[-] The following 1 user Likes Tom BD Bad's post:
  • Oscar
Reply
Login to remove this ad | Register Here
#2
Love the X140, its that esc twitching/desync in the first video???
FreeStyle FPV from Northern Quebec, Canada YOUTUBE - INSTAGRAM
[-] The following 1 user Likes Falkor's post:
  • Tom BD Bad
Reply
#3
every bloody flight after killing the stock FC suffered from the twitching, I replaced the FC and ESC with another stack I had (clone of the F428) I then tried to change out the ESC with the stock one, annoyingly despite having the same plug the output wires from the ESC were different and I burned the F428 FC too. Anyway I have a replacement on the way, when I get it I hope the problem is solved... not holding my breath though  Dodgy
Windless fields and smokeless builds
Reply
#4
not sure if it would help, but try using a slower ESC protocol? or try Oneshot 125 to see if you still get any twitches
Don't be a LOS'er, be an FPV'er :)  My Gear - Facebook - Instagram - Twitter
Reply
#5
Thanks Oscar, I will try that with the next FC that is on the way. The 1st replacement I ordered along with a forester 3" frame, considering I still have two 20x20mm 4-in-1 ESC's, the stock motors and the runcam micro swift clone that comes as stock, I thought that I would build another slightly lighter 3"... Annoyingly I fried the new FC as soon as I connected the battery. Dammit again!!
Windless fields and smokeless builds
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Should have bought extra motors. B4tn 7 355 18-Apr-2023, 12:45 AM
Last Post: Pathfinder075
  tmotor P1604 motors Clover 3 597 08-Sep-2022, 05:00 PM
Last Post: Pathfinder075
  I forgot I had these props ebeez 0 187 19-Apr-2021, 01:59 AM
Last Post: ebeez
  Dal Folders. New spot. New props. One pack. Drone0fPrey 11 980 30-Jun-2020, 06:44 PM
Last Post: Drone0fPrey
  Rough props = jello brnmd 0 380 02-Oct-2019, 01:59 PM
Last Post: brnmd


Login to remove this ad | Register Here