Is anyone familiar with the fpvstyle f3 evo flight control board?? I got it for only 20 but did get any paper work or screws etc and was just wondering if anyone has any knowledge on this board?? Hope to hear back from someone, jeff g
I hope you were expecting something for brushed motors!
It's just a simple F3 board with a built in FrSky receiver. It will run Betaflight (or Cleanflight) and should be flashed with the SPRACINGF3EVO target.
Your opinion is this a decent board? So what kinda motors can I use with this board??
I hope you were expecting something for brushed motors!
It's just a simple F3 board with a built in FrSky receiver. It will run Betaflight (or Cleanflight) and should be flashed with the SPRACINGF3EVO target. [/quote]
I don't have one of these boards myself but it's probably fine for the purpose. It's maybe a little expensive at $20, but it does, at least, have a receiver built in.
20-Mar-2017, 07:47 PM (This post was last modified: 20-Mar-2017, 07:48 PM by Oscar.)
(20-Mar-2017, 07:37 PM)Djseven0 Wrote: Yeah I was interested Ns looking at some bold clash coreless motors that are 68000 rpm,would they work?
could you post the link to the product you are talking about? we need more information on the spec, such as voltage rating, current draw, motor size etc...
and yes, this FC is designed for coreless motors (brushed motors)
The motors are on tmart.com and there info is Boldclash 18000KV 6x15mm Coreless CW CCW Motor Axis Aircraft Model Aircraft Motor for Tiny Whoop Inductrix H36 E010
Ok thank you! Also on the fc when you install it on the frame you use the Arrows to point to the back or front of the drone? Hope I'm not sounding dumb here just new to this is all lol