Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
fpv camera setup
#1
I'm looking for suggestions on what are some cheap and reliable fpv cameras, as well as a setup where I can view the feed from my phone. Thanks in advance!
Reply
Login to remove this ad | Register Here
#2
eachine otg receiver - vrx for view on your phone

caddx ratel line
Reply
#3
Check out the runcam phoenix 2... it's fantastic
Enjoy FPV Drone adventures? My GearYouTube, website
Reply
#4
Hi Jerry,

From my perspective, the Foxeer 1200TVL Razer Nano Low Latency FPV camera
is a very good analog camera especially for the money: $ 17.90 USD at PyroDrone. 
Although some will say that 600 TVL is the most that the analog VTXs will transmit,
this camera is MUCH clearer than those with lower resolution that I have used.

The Caddx Ant has almost the same specifications and price, however, every time
that I have tried it, the resolution that I get is not nearly as good as the Foxeer Razer
Nano (above) even with the same VTX, same quad same settings. So I always switch 
back to the Razer Nano.  Now, I don't know what the difference is between them, but 
the Foxeer camera always seems to perform as good as any and better than most 
especially at that price point. 

I have also tried some more expensive cameras, but didn't get any better quality so
I simply can't justify the money. Yeah, I can get 2 of these for what one of the higher
priced cameras would cost. 


Consequently, the Foxeer Razer Nano is my preferred camera, the one that I have on
most of my quads, and the one that I always keep on hand in the parts bin.

Later, iFly   High Five
______________________________________
My BUILDS  ||   My INDEX   ||  Parts Guide  <-- Download


Reply
#5
My personal fav is the Cadxx Ratels.. any of them.. for all the same reasons as above .. also they are great in low light..
[-] The following 2 users Like Rob Axel's post:
  • iFly4rotors, mattyfleischfpv
Reply
#6
I only use Caddx Ant Nano for all of mine, but the image quality seems to differ a lot.
Try Not, Do or Do Not
- Yoda

[-] The following 2 users Like Pathfinder075's post:
  • iFly4rotors, mattyfleischfpv
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Help for building an fpv drone NewToFPV 1 90 26-Apr-2024, 12:44 PM
Last Post: SnowLeopardFPV
  Meteor 65 pro replacement camera NewToFPV 19 451 19-Apr-2024, 06:19 AM
Last Post: NewToFPV
  FPV Beginner worldFPVwide 3 130 19-Apr-2024, 04:30 AM
Last Post: SeismicCWave
  Swapping Caddx camera's Jelle 1 107 16-Apr-2024, 10:48 AM
Last Post: SnowLeopardFPV
  FPV Beginner worldFPVwide 1 127 14-Apr-2024, 10:25 PM
Last Post: Pathfinder075


Login to remove this ad | Register Here