11-Sep-2022, 11:05 PM
Review: https://oscarliang.com/eachine-wizard-x220-v3/
Original CLI:
After tuning CLI: coming soon.
Original CLI:
Code:
defaults nosave
# version
# Betaflight / STM32F405 (S405) 4.3.1 Jul 13 2022 / 03:32:11 (8d4f005) MSP API: 1.44
# config: manufacturer_id: GEPR, board_name: GEPRCF405, version: edcd244b, date: 2022-06-29T02:24:46Z
# start the command batch
batch start
# reset configuration to default settings
defaults nosave
board_name GEPRCF405
manufacturer_id GEPR
mcu_id 005200424d43501120303831
signature
# feature
feature -RX_PARALLEL_PWM
feature TELEMETRY
# serial
serial 1 2048 115200 57600 0 115200
# beeper
beeper -BAT_LOW
# beacon
beacon RX_SET
# led
led 0 0,0::C:2
led 1 1,0::C:2
led 2 2,0::C:2
led 3 3,0::C:2
led 4 4,0::C:2
led 5 5,0::C:2
led 6 6,0::C:2
# aux
aux 0 0 2 1700 2100 0 0
aux 1 1 2 1700 2100 0 0
aux 2 13 3 1700 2100 0 0
aux 3 15 1 1700 2100 0 0
# vtxtable
vtxtable bands 5
vtxtable channels 8
vtxtable band 1 BOSCAM_A A FACTORY 5865 5845 5825 5805 5785 5765 5745 5725
vtxtable band 2 BOSCAM_B B FACTORY 5733 5752 5771 5790 5809 5828 5847 5866
vtxtable band 3 BOSCAM_E E FACTORY 5705 5685 5665 0 5885 5905 0 0
vtxtable band 4 FATSHARK F FACTORY 5740 5760 5780 5800 5820 5840 5860 5880
vtxtable band 5 RACEBAND R FACTORY 5658 5695 5732 5769 5806 5843 5880 5917
vtxtable powerlevels 4
vtxtable powervalues 14 20 23 28
vtxtable powerlabels 25 100 200 600
# master
set acc_calibration = 21,-36,33,1
set max_check = 2000
set rssi_channel = 16
set vbat_min_cell_voltage = 320
set vbat_warning_cell_voltage = 340
set ibata_scale = 280
set small_angle = 180
set osd_vbat_pos = 2434
set osd_rssi_pos = 2135
set osd_tim_1_pos = 2453
set osd_warnings_pos = 14633
set vtx_band = 1
set vtx_channel = 1
set vtx_power = 1
set vtx_freq = 5865
profile 0
profile 1
profile 2
# restore original profile selection
profile 0
rateprofile 0
rateprofile 1
rateprofile 2
rateprofile 3
rateprofile 4
rateprofile 5
# restore original rateprofile selection
rateprofile 0
# save configuration
After tuning CLI: coming soon.