hey guys...
i had this esc's long back from hobbyking and havent used them till last week were i found that my little bees are missing a capacitor and hence it restarted midflight well... 
coming to the point this escs come with pin headers which arent that good for our racers as they consume space and has a odd figure on the arm..
check the video out for the pin diagram and stuff i feel this escs are good i used them with the following setup:
sunnysky 2204 2300kv
dys 16amp esc 
tattu 1300mah 3s
2blade props
naze 32 rev 6


on 4s may the motors would draw more and hence no use of the esc as they would burn so didnt try 4s yet ...
 will soon do that

The motors can handle 4s, but I would probably go for atleast a 20A esc. But you should be just fine if you are running 3s

(30-Nov-2016, 04:33 PM)oyvinla Wrote: The motors can handle 4s, but I would probably go for atleast a 20A esc. But you should be just fine if you are running 3s

yes thats what i wrote in the last line motors and the setup supports 4s but esc might not survive hehe on 3s it is f9