Posts: 37
Threads: 4
Likes Received: 4 in 4 posts
Likes Given: 13
Joined: Mar 2024
Reputation:
0 Hello
I am flying the meteor 65 pro for a wile now, and I just smashed the drone on a wall...
Now is the image that I get out of the camera black...
I opend up the meteor 65 pro and everything seemed fine.
Does someone know what the problem is?
Regards
• Posts: 2,349
Threads: 118
Likes Received: 812 in 659 posts
Likes Given: 126
Joined: Feb 2021
Reputation:
20 You damaged something during the crash ..
does it still fly?
Do you see the osd in ur goggles?
If u have a jewelers loupe inspect your fc/ camera connections real good!
• Posts: 1,737
Threads: 60
Likes Received: 1,019 in 735 posts
Likes Given: 96
Joined: Jan 2023
Reputation:
52 Is the image all black (possibly the OSD chip on the FC is damaged or the wire from the FC to VTX is loose) or do you see the BF OSD on a black/grey background (camera is damaged or wires from camera to VTX is loose).
• Posts: 2,401
Threads: 74
Likes Received: 1,346 in 1,004 posts
Likes Given: 782
Joined: Apr 2022
Reputation:
41 Buy a new camera. A Caddx Ant Nano will work, or the BetaFPV C02.
But first, check the soldering/wires between the camera and the vtx. Chances are you broke a wire on one side of the equation. I had the same issue after a crash on my Meteor85. Beware the pads on the camera and the vtx are super small so precision soldering required. If you don't think you can do it, just buy a new camera and save that one for a rainy day when your soldering skill is at that level.
Try Not, Do or Do Not
- Yoda
Posts: 37
Threads: 4
Likes Received: 4 in 4 posts
Likes Given: 13
Joined: Mar 2024
Reputation:
0 20-Mar-2024, 12:01 PM (This post was last modified: 20-Mar-2024, 12:03 PM by NewToFPV.) Thanks for everyone's help!
• Posts: 37
Threads: 4
Likes Received: 4 in 4 posts
Likes Given: 13
Joined: Mar 2024
Reputation:
0 Hello everyone,
I just crashed my meteor 65 pro and after that my radio (the lite radio pro) said "telemetry lost"...
I opend my drone up and there is no damage, the red 'wire' of the ExpressELRS is still there and not broken so I don't see what the problem could be...
Can anyone help me out?
Thanks
Regards,
NewToFPV
• Posts: 1,737
Threads: 60
Likes Received: 1,019 in 735 posts
Likes Given: 96
Joined: Jan 2023
Reputation:
52 Did you try to rebind it to your radio. Does the RX LED double-flash in bind mode?
•