18-Nov-2016, 09:59 PM
You were in constant failsafe?
Arm by switch works from time to time? |
18-Nov-2016, 09:59 PM You were in constant failsafe? 18-Nov-2016, 11:39 PM nope, failsafe would be blinking leds on fc (it wasn't the case) also my failsafe switch is turned not enabled. All the best Grzesiek (Grisha/ Greg) Curently flyable: Nox 5, Minimalist 112 Bench / in progres: fixing Nox 3, Scrap thinking about building: 450 19-Nov-2016, 01:22 AM A piece of lint has found it's way inside the switch, causing inconsistent contact? Sorry, that's all I've got 19-Nov-2016, 02:44 AM I have a riddle of my own (but I don't know the answer). How did this thread go from 150 views to 7200 views in less than 8 hours? I am bit surprised none of those people had the answer... 19-Nov-2016, 06:26 AM My F3 Evo will blink red for about 10 seconds before it goes out (which means it's ready to arm) and during that time I can toggle the switch all I want and nothing happens - exactly as you are showing. but I'm sure the answer to your riddle is a little more technical. I don't know if I'm on the right track, but Naza-M needs to be toggled between flight modes to activate gyro calibration 19-Nov-2016, 10:18 AM @reno First is warm but not hot yet. @scotty Answer: Do not share the links with your friends who are who are it web specialists... All the best Grzesiek (Grisha/ Greg) Curently flyable: Nox 5, Minimalist 112 Bench / in progres: fixing Nox 3, Scrap thinking about building: 450 19-Nov-2016, 11:23 AM Ah... no SD card in the slot! (19-Nov-2016, 02:44 AM)sloscotty Wrote: I have a riddle of my own (but I don't know the answer). How did this thread go from 150 views to 7200 views in less than 8 hours? I am bit surprised none of those people had the answer... No... this is reality cheating doesn't count Grisha LOL, good try though... http://i.imgur.com/DhHPCEel.png as there are no other options or solutions here it goes: fc - correct setup, rx - correct setup closest person to solution Renov8r issue - sand in gimbal when throttle is maxed down typically it is at 1000, here while doing the tests in raceflight.. it was at 1000 as i was pushing it down with a finger... however during the arming proces my left hand is pulling the switch and when the stick is not forced down it sends something like 1050 or so... (i don't hold the throttle while arming) so what is the learning out of it? before you do all the fancy analysis... clean the gear... All the best Grzesiek (Grisha/ Greg) Curently flyable: Nox 5, Minimalist 112 Bench / in progres: fixing Nox 3, Scrap thinking about building: 450 23-Nov-2016, 01:10 PM I like it! "Sand in yer gimbal" (kinda like "bats in yer belfrey") 23-Nov-2016, 02:59 PM well this is realted to the amount of dirt that my quads are carrying the build weight is irrelevant... after few flights they have +1kg of soil/grass/trees on them... until now my cobras could live with it... the new motors i see now ... might not work with soil in them All the best Grzesiek (Grisha/ Greg) Curently flyable: Nox 5, Minimalist 112 Bench / in progres: fixing Nox 3, Scrap thinking about building: 450 23-Nov-2016, 03:59 PM I told you a few days ago I don't like how your throttle feels :p Find me on Youtube and Instagram. I currently fly: DRC Aura, NOX5R, Minimalist 112 and drive a scrap RC car 23-Nov-2016, 05:06 PM So i was right on first guess... what did i win again? |
« Next Oldest | Next Newest » |
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Flight time decreased | Billybobthe3 | 8 | 186 | 01-May-2024, 10:57 PM Last Post: hugnosed_bat | |
Is it possible to test if an ESC works without soldering? | HypnoToad | 2 | 154 | 23-Mar-2024, 07:22 PM Last Post: HypnoToad | |
Boxer SA Switch will NOT Arm my Quads | soky157 | 35 | 1,126 | 01-Mar-2024, 12:29 PM Last Post: SnowLeopardFPV | |
Can't get drone to arm | dirtydave | 3 | 294 | 02-Feb-2024, 05:22 PM Last Post: mstc | |
OSD not showing all the time | Luizmazza | 1 | 166 | 21-Dec-2023, 11:10 AM Last Post: SnowLeopardFPV |