08-Oct-2016, 11:28 AM
I have an odd problem with one of my ZMX V3 2600kv motors. The problem is when I arm my motors, they spin up, and when I disarm, all the motors but one spin down quickly (due to damped light). So I thought perhaps the ESC didn't have damped light turned on (but turned out it did).
I then swapped the motors around, and it happened again. I've not received my spare motors yet, but I'm pretty sure the new motor will make the problem go away.
However - is it possible my ESC settings are causing damped light to not kick in, and maybe it's very close to NOT working on the others ESCs, but is just below the threshold? I think it's hardware, but I'm curious if anyone else has had this issue.
I then swapped the motors around, and it happened again. I've not received my spare motors yet, but I'm pretty sure the new motor will make the problem go away.
However - is it possible my ESC settings are causing damped light to not kick in, and maybe it's very close to NOT working on the others ESCs, but is just below the threshold? I think it's hardware, but I'm curious if anyone else has had this issue.