If you enjoy our forum, why not join us? :) Click here to register in a few simple steps

Login to remove this ad | Register Here
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
650 IronMan - One of My First Builds
#1

This is one my first builds. And how I started getting into quads. It's a Tarot Ironman 650 with a APM2.6 flight controller, with 30A ZTW spider esc, Tarot 4006-620KV Motors
[-] The following 3 users Like JimmyLe813's post:
  • Oscar, sloscotty, BigglesFPV
#2
one of my first (and still have it) is the Sky Hero Y6
My youtube channel

[-] The following 1 user Likes BigglesFPV's post:
  • JimmyLe813
Reply
#3
(09-22-2016, 04:33 AM)BigglesFPV Wrote: one of my first (and still have it) is the Sky Hero Y6

I'm thinking about building a Y6 myself. I seen a little one that was about the size of a 250.
Reply
Login to remove this ad | Register Here
#4
My first build was a tricopter using the designs from RC Explorer. It ran on the Multiwii firmware which was 8 bit.
Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1
FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1
>>>>>>>>>>Check Out My Build<<<<<<<<<<
Reply
#5
Looks like a nice build, i will post my 600 quad tomorrow here.
Reply
#6
Love my 650.  Did you know that the canopy from the 680 Pro is a direct fit, no mods required!
Reply
Login to remove this ad | Register Here
#7
JimmyLe813, what kind of PDB did you have used?
Reply
#8
(10-26-2016, 11:53 AM)Ikkuh Wrote: JimmyLe813, what kind of PDB did you have used?

i'm using the Tarot 6 Power Hub. and i mounted it underneath the drone
Reply
#9
What kind of flight times are you getting? And what size lipo are you using? I am thinking about upgrading to this frame from my overly heavy dji f450. I already have a set of t motor 2814 710kv that I could use, all I would need to do is upgrade my esc and frame.
Reply
Login to remove this ad | Register Here
#10
(12-08-2016, 04:10 PM)Justynkace Wrote: What kind of flight times are you getting? And what size lipo are you using? I am thinking about upgrading to this frame from my overly heavy dji f450. I already have a set of t motor 2814 710kv that I could use, all I would need to do is upgrade my esc and frame.

i was getting anywhere between 10-13 minutes on a 8000mah battery.
Reply