18-Jul-2023, 11:19 PM (This post was last modified: 09-Aug-2023, 08:09 PM by Sir Brokalot.)
So I was just flying around in a small park, hiding under some trees when suddenly the video decided to just freeze up during a tree jumpy move. I was not going full throttle as you can see by the AMPS on my OSD, which was still online so transmission from VTX to RX was fine..
-Update: I was using the wrong VTX tables. Label 800 in Betaflight needed to get value 600, and not value 800 which I was sending to the VTX. Guess that messed it up somehow.
Video did not come back until I unplugged and repowered the quad.
After the crash I lowered the power output of my VTX to 400MW from 800MW. (Which are both a bit overkill for nearby flying)
The second flight and final flight went without anymore problems. But it got me freaked out.
See the video here:
https://www.youtube.com/embed/hCyJiL-0RB8
Luckily I was able to shift to angle mode and land it LOS from a distance without crashing too hard. (I suck at LOS)
Sadly I forgot to turn on the GoPro for some pretty crash footage..
Does anyone have any idea what could have caused it?
I've checked all cables and this frame has a stock capacitor on it, could it have been the 800MW output power that was pulling power from the camera or maybe asking too much from the FC.. just guessing.
Nazgul 5 Analog v2
The VTX: IFlight Succex Force 5.8
Camera: Stock IFlight RaceCam
-Update: I was using the wrong VTX tables. Label 800 in Betaflight needed to get value 600, and not value 800 which I was sending to the VTX. Guess that messed it up somehow.
Video did not come back until I unplugged and repowered the quad.
After the crash I lowered the power output of my VTX to 400MW from 800MW. (Which are both a bit overkill for nearby flying)
The second flight and final flight went without anymore problems. But it got me freaked out.
See the video here:
https://www.youtube.com/embed/hCyJiL-0RB8
Luckily I was able to shift to angle mode and land it LOS from a distance without crashing too hard. (I suck at LOS)
Sadly I forgot to turn on the GoPro for some pretty crash footage..
Does anyone have any idea what could have caused it?
I've checked all cables and this frame has a stock capacitor on it, could it have been the 800MW output power that was pulling power from the camera or maybe asking too much from the FC.. just guessing.
Nazgul 5 Analog v2
The VTX: IFlight Succex Force 5.8
Camera: Stock IFlight RaceCam