21-May-2020, 05:05 PM
I recently upgraded my Tinyhawk. I had to replace he frame, I also replaced the camera to a Runcam Nano 2. I wedged my VTX (HGLRC NANO) behind the camera and hold the camera in place with 2 strips of gorilla tape (not the most elegant but it works). I have installed BF 4.1 w/ bi-directional dshot, PMB Tune, JESC 48k esc flash.
Now when I fly it the quad wobbles something fierce, almost un-flyable. I notice it the most when accelerating from a hover or out of a turn. I also notice it when I chop the throttle and let it float it acts like a leaf in the wind. I do not have a way to post and DVR footage as I am still using the EMAX goggles. I noticed one of the props has a very small nick in it. Could the prop be causing this or could it be something else. It used to fly fine and i recently noticed it after changing the frame.
Any ideas and thanks in advance.
Now when I fly it the quad wobbles something fierce, almost un-flyable. I notice it the most when accelerating from a hover or out of a turn. I also notice it when I chop the throttle and let it float it acts like a leaf in the wind. I do not have a way to post and DVR footage as I am still using the EMAX goggles. I noticed one of the props has a very small nick in it. Could the prop be causing this or could it be something else. It used to fly fine and i recently noticed it after changing the frame.
Any ideas and thanks in advance.