Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tinyhawk 2 going crazy in 2s
#1
Ok so I'm really new to fpv got everything in today and got everything running in betaflight I set it on profile 1 everything ran great but when I set it to profile 2 and put the 2s battery in and took off the whoop went crazy and I tried to throttle down completely but it didn't want to immediately it was like the battery was pulsing. Is this a bad battery, bad code, user error? And a few more questions, I've seen videos of guys who can get some really good range with a tinyhawk 2 but mine not at all if I fly over to the other side of my house I lose signal completely. I just got a pair of fat shark scouts and a taranis X7 access which I found out quickly it doesn't bind with d8 so I had to research a way to bind with d16 access, could this be a reason why the range is pure s*** or did I just get a band whoop? And is this normal with the drone in hand and having it at Idle speed when I tilt the drone some motors speed up seemingly to compensate and some don't, I've had cheaper drones that didn't do this. I'm very excited any this new hobby especially with being stuck at home, I literally just got this stuff in today that's how new I am to fpv, any advice or help would be greatly appreciated.
Reply
Login to remove this ad | Register Here
#2
What exactly is the settings for profile 2. Likely higher rates. Between the increase voltage and higher profile rate, it was probably more than you can handle. Remember, just because you cut throttle, it doesn't mean the momentum slows down right away. This is how a lot of tricks are done. Basically throwing the quad, doing some zero gravity and hang time tricks.

As far as range, the blockage from your house could cause a failsafe. Guys who fly further, don't have a house in their way.

Yes, the motor will compensate if you move your quad in your hands. The PID is active.

Everything seems normal. You can post your profile settings so we can confirm that you did get an increase in rates with profile 2.
Reply
#3
Hi,

Save the 2s for when you get the TH Race  Big Grin

Flies excellent on 1s indoors and outdoors.

Make sure the antennas are sticking out proudly from the canopy. 

Did you unlock the VTX?

Think it's stuck in 25mw unless you unlock it.

Typically my fix with Tinyhawks is to replace the Rx with crossfire right out of the box.

For example, my TH Race has made it out 522m running 100mw.

Hope this helps,

Zippy
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  TinyHawk Squadron home for repairs Rob Axel 16 498 10-Jun-2024, 03:12 AM
Last Post: FPVme
  Help Tinyhawk 3 Plus Freestyle - battery ph2 to bt2? CDCMeteor75ProNewb 5 469 22-Apr-2024, 09:31 PM
Last Post: Timmyhawk 2
  Can't get Emax Tinyhawk 3 HD into binding mode sharptailhunter 7 653 13-Apr-2024, 09:16 PM
Last Post: CDCMeteor75ProNewb
  Help TinyHawk 2 Freestyle Rx issue Diesel79 3 352 27-Mar-2024, 09:15 AM
Last Post: Rob Axel
  Radiomaster Boxer Elrs and Tinyhawk 2 freestyle WEnis_TV 10 912 15-Jan-2024, 05:45 AM
Last Post: Pathfinder075


Login to remove this ad | Register Here