Hello!
I am looking for the dxf files for the TBS Source One 7" Long Range Dead Cat frame. I found the standard frame files:

https://github.com/tbs-trappy/source_one...a7853bfc6e

Does anyone know where I can find the LR files? I want to cut one myself (Top Plat, Rear Plate, and Front Plate) as I have the CF and my son has access to water jet. Any help appreciated!!

The 5" and 7" share the same frame (top/bottom/camera plates) except for the arms.

The 7" arms are thicker being 6mm instead of 4mm for the 5" and off course longer.

The 7" arms are in the same repository:

SO_v4_7inch_arm_6mm_back_2x.dxf : https://github.com/tbs-trappy/source_one...ack_2x.dxf

SO_v4_7inch_arm_6mm_front_2x.dxf : https://github.com/tbs-trappy/source_one...ont_2x.dxf

kafie1980 thank you so much for all of the information! Idid not realize the 2 fuselage were the same so now I have what I need. I appreciate your taking the time to reply!!