hey folls

1-The cable between VTX and the camera, do all companies have the same number of pins?

That is, all cables are the same, or just O3 Differs?

2- Does the pin have a diagram? I want to know what is inside it and how it is connected. Is there a diagram for it?

Just curiosity
I want to learn

From what I have read /seen.. the (mipi) Cable from the camera to the (digital) vtx are proprietary… DJI, walksnail, HDzero.. They may LOOK similar but they are NOT interchangeable ..
But you do bring up a point..,if they get “mixed up” (I have WS AND HDZ).. is the physical plug the only way to identify them?

(22-Apr-2024, 01:33 PM)Rob Axel Wrote: From what I have read /seen.. the (mipi) Cable from the camera to the (digital) vtx are proprietary… DJI, walksnail, HDzero.. They may LOOK similar but they are NOT interchangeable ..
But you do bring up a point..,if they get “mixed up” (I have WS AND HDZ).. is the physical plug the only way to identify them?

We are waiting for an answer.

Perhaps digital is no different

(22-Apr-2024, 01:33 PM)Rob Axel Wrote: From what I have read /seen.. the (mipi) Cable from the camera to the (digital) vtx are proprietary… DJI, walksnail, HDzero..    They may LOOK similar but they are NOT interchangeable ..
  But you do bring up a point..,if they get “mixed up” (I have WS AND HDZ).. is the physical plug the only way to identify them?

I believe I watched a YouTube video where Bardwell plugged the MIPI cable into different cameras and protocol and they the three digital systems do not like to talk to each other. Apparently some MIPI cables have the same connecting plugs and will connect.

I FOUND CHRIS ROSSER EXPLAIN MIPI CSI :

https://youtu.be/QRpP_ExdmqA?si=Y7gz7gyXUcMvfw9B