16-Aug-2023, 11:42 AM
I'm attempting to set up my runcam link falcon nano. When connected to my speedybee f405 v3 and powered with a lipo, a faint red light appears on the runcam link, which doesn't change color. Surprisingly, when I tested it with another speedybee f405 v3 flight controller, it worked perfectly, pairing with my DJI goggles. However, when I tried using it with the flight controller I want to use, it remained stuck on the red light. I checked that MSP is enabled on the correct UART and replicated the exact settings from the flight controller it worked on, but the issue persisted. I even tried soldering the air unit directly to the flight controller, suspecting a port problem, but the problem remains. I have tried researching and attempting various solutions I found online but I haven't been able to make it work.
Here is what I am using:
Flight controller: SpeedyBee F405 V3 30x30 Flight Controller (with Firmware 4.4.2)
ESC: SpeedyBee F405 BLS 50A 30x30 4-in-1 ESC
Receiver: TBS crossfire nano
Air unit: Runcam Link Falcon Nano HD FPV Camera Kit for DJI HD FPV (HD-FPV-LINKFAL)
Goggles: DJI FPV goggles V1
Battery: CNHL Speedy Pizza 1200mAh 22.2V 6S 100C LiPo Battery
Radio: FrSky X9D taranis with TBS Crossfire module
Here is what I am using:
Flight controller: SpeedyBee F405 V3 30x30 Flight Controller (with Firmware 4.4.2)
ESC: SpeedyBee F405 BLS 50A 30x30 4-in-1 ESC
Receiver: TBS crossfire nano
Air unit: Runcam Link Falcon Nano HD FPV Camera Kit for DJI HD FPV (HD-FPV-LINKFAL)
Goggles: DJI FPV goggles V1
Battery: CNHL Speedy Pizza 1200mAh 22.2V 6S 100C LiPo Battery
Radio: FrSky X9D taranis with TBS Crossfire module