Posts: 2
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2020
Reputation:
0 I just upgraded from the R9MM to this receiver but uncertain on wiring this up on my iflight F4. Not much documentation on it. Can anyone assist with this. I know the power, ground and a.port but not certain about any other wires that need to be wired up. I flashed to latest flex firmware on all components.
• Posts: 21,250
Threads: 587
Likes Received: 8,962 in 6,632 posts
Likes Given: 1,425
Joined: Jun 2018
Reputation:
787 If you had the R9MM working on the same FC then it will be an almost direct translation of the wiring to the Slim+.
Can you please run both the "dump" and "diff all" commands in the Betaflight Configurator CLI tab and copy/paste the results back here.
Please also let us know what flight controller and what transmitter you have.
• Posts: 2
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2020
Reputation:
0 I will attach Monday when I return home. The FC I’m using is a iFlight Succex E F4 stack. QX7s. I flashed the latest firmware on the receiver and R9M with the FCC FW. Im using beta flight 4.1. I’ll send the dump Monday. Thank you.
•