04-Jun-2018, 12:37 AM
Built my first complete build. Hooked up ocusync air unit (sweet!!!!) but can't get this thing to behave. Shaking like crazy. Tried the following:
1. Checked motors direction.
2. Tried different props.
3. Flashed different bheli firmwares.
4. Tried changing ESC protocols. Dshot300, 600, multishot etc.
5. Noted that motors do not spin equally in Betaflight. Motor 2 always lags behind.
6. Flashed firmware for the FC.
7. Tried different receiver - the same result.
8. Reset radio.
9. Calibrated ESCs.
Configuration:
Motors
ESCs
FC
What can i do to make it fly? Please, help.
Btw, it is not the first drone that behaves like that in my house. Am I cursed?
1. Checked motors direction.
2. Tried different props.
3. Flashed different bheli firmwares.
4. Tried changing ESC protocols. Dshot300, 600, multishot etc.
5. Noted that motors do not spin equally in Betaflight. Motor 2 always lags behind.
6. Flashed firmware for the FC.
7. Tried different receiver - the same result.
8. Reset radio.
9. Calibrated ESCs.
Configuration:
Motors
ESCs
FC
What can i do to make it fly? Please, help.
Btw, it is not the first drone that behaves like that in my house. Am I cursed?