(17-Oct-2020, 08:54 AM)Japsu Wrote: Yeah, it's the airmode causing this. However, the issue was with my radio! I checked my Jumper t16 ribbon cables and re-installed them, now everything works. The broken cables somehow mixed two of the channels, so I basically had two arm switches! If I toggled my betaflight setup armswitch off, the quad didn't disarm. I started flipping switches I didn't even have setup in betaflight, and one of the switches magically disarmed it!

Everything works now, thanks for the help

Yeah if it wwas happening afte you disarm that certainly made sense.

I too recently had to reseat my ribbons in my jumper T16........ Itworked like 2 months before.... I sut it off... then two months later I turned it on and it said "button stuck" and wouldn't lemme go into menus or anything.

I looked up the issue and reseating the ribbons was suggested, and doing so worked. Strange right?

These radios really are pretty damn good for the price, I guess they had to cut cost somewhere ;D

Hey! I’m having the exact same problem as you did Japsu, however I’m using Tango 2 Pro and don’t think the problem is in ribbon cables… any idea what else could it be? It seems like my quad flips out and than reboots at landing even with air mode off…

yours might be not an xm+ receiver issue, something else

if your quad reboot while land, i would check if nothing is loosen-everything fits thight. is your capacitator still connected?

(29-Jul-2021, 05:26 PM)hugnosed_bat Wrote: yours might be not an xm+ receiver issue, something else

if your quad reboot while land, i would check if nothing is loosen-everything fits thight. is your capacitator still connected?

I’ve recently converted to hd from analog and changed capacitor (an old one did fall off in a crash)… Maybe I messed something up during the conversion, I really dunno. The quad flies fine and everything seems to fit tight.

Here is a video of the quad flipping out and rebooting: https://we.tl/t-MGsMAUo2bD