Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.
IntoFPV Forum › Hardware Discussion › Flight Controller v
problem in barometr

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thread Modes
problem in barometr
rezafpv Offline
Member
*
Posts: 24
Threads: 7
Likes Received: 0 in 0 posts
Likes Given: 7
Joined: Feb 2022
Reputation: 0
#1
26-Mar-2022, 11:01 PM
My flight controller is model f722mk2
I updated the firmware . After the update . The barometer no longer worked
I enable it in BetaFlight but the icon above is not enabled

what should I do
Reply
Login to remove this ad | Register Here
SnowLeopardFPV Offline
Member
******
Pole Dancer Popular Member Posting Freak Tree Hugger Whoopee Owner
Posts: 21,416
Threads: 595
Likes Received: 9,039 in 6,690 posts
Likes Given: 1,428
Joined: Jun 2018
Reputation: 796
#2
27-Mar-2022, 12:11 AM
What Betaflight target did you flash to the FC? And did you click the "Apply Custom Defaults" button when the message appeared asking if you wanted to do that?

Please run the "dump" command in the CLI and post the results back here.
Reply
rezafpv Offline
Member
*
Posts: 24
Threads: 7
Likes Received: 0 in 0 posts
Likes Given: 7
Joined: Feb 2022
Reputation: 0
#3
27-Mar-2022, 09:37 AM (This post was last modified: 27-Mar-2022, 09:44 AM by rezafpv.)
I wanted to update
Apply Custom Defaults"  .  Yes, I confirmed
I attached the dump file
Reply
kafie1980 Offline
Just trying to be helpful
***
Posting Freak Popular Member
Posts: 4,550
Threads: 38
Likes Received: 1,245 in 1,064 posts
Likes Given: 430
Joined: Aug 2020
Reputation: 118
#4
27-Mar-2022, 01:57 PM
Is this the FC you have?

https://www.diatone.us/products/mb-dji-f...4fb4&_ss=r

This would require the MAMBAF722_I2C target.
Reply
rezafpv Offline
Member
*
Posts: 24
Threads: 7
Likes Received: 0 in 0 posts
Likes Given: 7
Joined: Feb 2022
Reputation: 0
#5
27-Mar-2022, 02:38 PM
(27-Mar-2022, 01:57 PM)kafie1980 Wrote: Is this the FC you have?

https://www.diatone.us/products/mb-dji-f...4fb4&_ss=r

This would require the MAMBAF722_I2C target.

my flight is f722 mk2 
this link 
https://www.diatone.us/products/mb-dji-f...4fb4&_ss=r
Reply
kafie1980 Offline
Just trying to be helpful
***
Posting Freak Popular Member
Posts: 4,550
Threads: 38
Likes Received: 1,245 in 1,064 posts
Likes Given: 430
Joined: Aug 2020
Reputation: 118
#6
27-Mar-2022, 11:00 PM (This post was last modified: 27-Mar-2022, 11:02 PM by kafie1980.)
(27-Mar-2022, 02:38 PM)rezafpv Wrote: my flight is f722 mk2 
this link 
https://www.diatone.us/products/mb-dji-f...4fb4&_ss=r

This would require the MAMBAF722_I2C target but your cli dump show you have the MAMBAF722 target flashed which may explain the Baro not being detected.
[-] The following 1 user Likes kafie1980's post:
  • rezafpv
Reply
rezafpv Offline
Member
*
Posts: 24
Threads: 7
Likes Received: 0 in 0 posts
Likes Given: 7
Joined: Feb 2022
Reputation: 0
#7
28-Mar-2022, 10:50 AM
(27-Mar-2022, 11:00 PM)kafie1980 Wrote: This would require the MAMBAF722_I2C target but your cli dump show you have the MAMBAF722 target flashed which may explain the Baro not being detected.

Thank you very much for your guide. I changed the framework and it worked
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Solved mixer mode problem [SOLVED] Debagle 0 165 20-Jun-2024, 10:07 PM
Last Post: Debagle
  Help Problem with GEP-F411-35A AIO + VTX V1 Walksnail Adam0880 2 431 09-Mar-2024, 08:35 PM
Last Post: Adam0880
  Help Problem accessing the ESP8285 chip on MATEK FC F405 WTE remi.auge 2 370 05-Mar-2024, 12:49 PM
Last Post: remi.auge
  Issue "Mixer Mode Problem detected" need help Steven FPV 9 652 24-Jan-2024, 06:36 AM
Last Post: Steven FPV
  Diatone stack current sensor problem Myman 10 1,746 27-Dec-2023, 12:02 AM
Last Post: Birbal


Login to remove this ad | Register Here