Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ORT Dual Shield PRO (fits all goggles?)
#1
Hi guys.
I'm sorry because this might be a silly question, but I would like to know if the ORT Dual Shield PRO can be used with the aomway commander goggles?
Reply
Login to remove this ad | Register Here
#2
The connector itself might work but the problem I see is that one of the terminals wouldn't be connected, there for might not work
Reply
#3
(23-Dec-2019, 01:32 AM)CM17X Wrote: The connector itself might work but the problem I see is that one of the terminals wouldn't be connected, there for might not work

[Image: 84ac011a20a7af39b0e699c86dc5f297.png]
I think it's possible to move the connector to the other side.
Reply
#4
(23-Dec-2019, 02:04 AM)soldierace Wrote: I think it's possible to move the connector to the other side.

Yes it is...

[Image: 70744561_2429364750608659_34919048336637...e=5E6CA2E6]
Reply
#5
(23-Dec-2019, 02:10 AM)SnowLeopardFPV Wrote: Yes it is...

[Image: 70744561_2429364750608659_34919048336637...e=5E6CA2E6]

Outside box thinking! That's great!
Reply
#6
(23-Dec-2019, 02:04 AM)soldierace Wrote: [Image: 84ac011a20a7af39b0e699c86dc5f297.png]
I think it's possible to move the connector to the other side.

Sorry for my innacurated advice. Great it will work for you!
Reply
#7
Thanks, guys. I know it was a dumb question, but I wasn't 100% sure it would work for me.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Problem no rx led in meteor 75 pro frsky version arju 11 232 09-Jun-2024, 06:27 PM
Last Post: arju
  one of my Cetus pro motors died, will this be a good replacement? hananelroe 1 115 27-May-2024, 08:49 PM
Last Post: Pathfinder075
  Ev800dm goggles not charging? wepp 2 171 18-May-2024, 07:34 PM
Last Post: wepp
  Share CLI configuration and firmware DarwinFPV BabyApe PRO ap79 4 432 14-May-2024, 04:43 AM
Last Post: ap79
  Trouble connecting taranis X-lite pro to Win 11 USB skipSSnova 7 2,680 05-May-2024, 05:46 PM
Last Post: BadRaven


Login to remove this ad | Register Here