Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
micro rx for tinyhawks
#1
Hi everyone!!!
Yesterday, while I was flying into the house, my THS fell ...
For some reason the receiver died, making some tests, sometimes she came back to life, but then she went definitively.
Maybe some soldering on the chip, who knows.
However I have seen that an external receiver can be connected.
I need some advice on which small and cheap receiver to buy.
Reply
Login to remove this ad | Register Here
#2
Reliability of the VTX on the TinyHawk seems to be a common issue. Another member on here just replaced the original VTX with a Rush Tank Tiny (in another thread HERE), but that is a bit large to fit under the canopy. Member yammahoppy recommended the HGLRC Nano in the following post...

https://intofpv.com/t-solved-tinyhawk-s-...7#pid91057
Reply
#3
(03-May-2020, 11:25 AM)SnowLeopardFPV Wrote: Reliability of the VTX on the TinyHawk seems to be a common issue. Another member on here just replaced the original VTX with a Rush Tank Tiny (in another thread HERE), but that is a bit large to fit under the canopy. Member yammahoppy recommended the HGLRC Nano in the following post...

https://intofpv.com/t-solved-tinyhawk-s-...7#pid91057

In the meantime I attempted a chip reflow,
I don't know if it was the reflow or the thermal shock,
it seemed to have worked, I made the binding by powering from USB, then I connected the lipo and died after a few minutes.

damn ... I had not seen the post .. sorry, I have more exhaustion than usual   Sad
Reply
#4
ahhhh,
the RX broke,
not the vtx  Big Grin
Reply
#5
Sorry. Misread the post.
Reply
#6
but no problem snow! thanks anyway Wink
I looked for rx problem and I didn't find it, it certainly passed before my eyes and I didn't notice it! Rolleyes

Searching the net I saw that these exist:
I think they are the smallest and cheapest,

[Image: nTJRoC0l.jpg] [Image: EKV2ercl.jpg]

this  and this
I have to check the characteristics well
Reply
#7
I've seen some minuscule FrSky compatible receivers the NewBeeDrone have created, but getting them outside of the US will probably be an issue.

EDIT: Here it is - the "Beeceiver"...

https://newbeedrone.com/collections/rece...o-receiver

[Image: b23377398df340026fd5f1488a298798af706fc1_1903x.png]
Reply
#8
I just realized that frsky xm on BG costs 10euro ...
Reply
#9
(03-May-2020, 12:31 PM)Corrado-c Wrote: I just realized that frsky xm on BG costs 10euro ...

Just notice that XM doesn't have telemetry (I like it as a new flyer), RXSR does have and it is also tiny.
Reply
#10
(03-May-2020, 03:16 PM)doronba Wrote: Just notice that XM doesn't have telemetry (I like it as a new flyer), RXSR does have and it is also tiny.

holaaa

yes I have seen, without telemetry in this quad it is fine,
even a few mm less in the tinyhawks is convenient
Reply
#11
today the receiver arrived, I mounted it, then I discovered a problem with an esc, it didn't work .....

after about an hour of nerves, I tried to re weld the microcontroller ..... and everything works, including the internal receiver ... Dodgy
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  CLI Dump for HGLRC Drashark 1S 1.6inch Micro Quad Oscar 1 806 23-Apr-2024, 08:08 PM
Last Post: segler999
  Help Micro Quad flying easy but wobbling Harry1 46 1,906 13-Feb-2024, 10:18 PM
Last Post: Pathfinder075
  AXII 2 Micro 20mm antenna fit in Mob6? dwije21 8 449 27-Aug-2023, 03:30 AM
Last Post: brettbrandon
  Build Micro cine lifter / Scorpion gunship mstc 2 615 09-Aug-2023, 03:57 PM
Last Post: iFly4rotors
  Help Micro reverb parts? truglodite 4 382 02-Aug-2023, 04:44 PM
Last Post: truglodite


Login to remove this ad | Register Here