Guys, I have a Mamba F722 App FC and want to pair it with my TMOTOR V2 Velox 45A ESC.

The connections are as such:

Mamba side:
CRT
RX6
M4
M3
M2
M1
VCC
GND

TMOTOR side:
Ground
Ground
VBAT
10V
4
3
2
1
CRT
TX

Can someone please help me map these correctly? The motor part and ground are obvious but, I need help with the power ones and data.

Thanks!

Vbat and VCC are terms used interchangeably. TX to RX6

10v and the extra ground are essentially a BEC and wouldn't go to the Mamba FC but to something like a DJI VTX directly.

(25-Apr-2022, 02:41 AM)sevro Wrote: Vbat and VCC are terms used interchangeably. TX to RX6

10v and the extra ground are essentially a BEC and wouldn't go to the Mamba FC but to something like a DJI VTX directly.

Thank you so very much! forgive me for asking but, I suppose CURR -> CRT and what do I do with the extra GND?

(25-Apr-2022, 02:46 AM)peek2much2 Wrote: Thank you so very much! forgive me for asking but, I suppose CURR -> CRT and what do I do with the extra GND?

Yes on current.

As mentioned you could use the 2nd ground with the 10v for something other than the FC.

(25-Apr-2022, 02:58 AM)sevro Wrote: Yes on current.

As mentioned you could use the 2nd ground with the 10v for something other than the FC.

Got it, thank you so much man!