Hi, I need help replacing my ESCs on my Eachine 250 Racer


My drone is equipped with this type of ESC (which can no longer be purchased)

So now the ESCs have to be replaced by this type.

But HOW ???
How do I mount the plugs so it all works?
if someone can please explain it to me (and very much like with pictures or video), then I will be very grateful.

The yellow wire on the old ESC is the signal wire. You can wire the white wire to the same place the yellow went to. As for the small black wire, you can ignore it or wire to the ground.

When you wire the motor to the pad, just make sure the motor spin the correct direction. Otherwise, just switch any two wires to reverse direction.

You can still get the ESC.

https://www.aliexpress.com/item/32609632746.html

Edit: my mistake. Not in-stock

(31-Oct-2019, 06:49 AM)voodoo614 Wrote: The yellow wire on the old ESC is the signal wire. You can wire the white wire to the same place the yellow went to. As for the small black wire, you can ignore it or wire to the ground.

When you wire the motor to the pad, just make sure the motor spin the correct direction. Otherwise, just switch any two wires to reverse direction.

Thank you very much!